BLOG

Installation Steps and Sealing Inspection Methods for Filter Bags

2026-01-31

The installation of filter bags must follow a standardized procedure to ensure optimal filtration performance and equipment safety. Before installation, the interior of the filtration equipment must be thoroughly cleaned to remove any residual impurities and dust, thereby preventing contamination or damage to the filter bags. At the same time, inspect the filter bags for any defects, such as tears or cracks in the seams, to avoid issues that could affect their subsequent use. During installation, adjust the orientation of the filter bags according to the equipment’s structural design, ensuring that the bag body fits snugly against the inner wall of the equipment and avoiding wrinkles or distortions that might reduce the effective filtration area. For filter bags equipped with retaining rings, align the rings precisely with the sealing grooves on the equipment and secure them using clamps or bolts to ensure a tight connection.

 

After installation is complete, a leak-tightness test must be performed to prevent fluid leakage from compromising the filtration efficiency. One method is the pressure test: inject a fluid at a specified pressure into the equipment and observe whether there are any leaks at the connections. Another method is the bubble test: apply soapy water to the sealed areas, then introduce compressed air. If bubbles appear, it indicates that there is a gap in the seal. Additionally, you can monitor the pressure differential before and after filtration to determine whether the filter bags are properly installed. If the pressure differential fluctuates abnormally, it may suggest that the filter bags have shifted or that the seals are not tight enough, requiring re-adjustment of their installation position.

 

During daily use, regularly check the sealing condition of the filter bags. Especially after replacing the filter bags or performing equipment maintenance, be sure to reconfirm the seal integrity. If any sealing issues are detected, promptly adjust the clamp tension or replace the sealing components to prevent leaks that could reduce filtration efficiency or damage the equipment. By ensuring proper installation and conducting rigorous sealing inspections, you can effectively extend the service life of the filter bags and guarantee the stable operation of the filtration system.

Previous:

Fluid filtration compatibility of filter cartridges

Next:

Filtration efficiency and corrosion resistance of liquid filter bags

中企跨境-全域组件 1.92 制作前进入CSS配置样式

Telephone：

Manager Wang · Sales Department 1：

E-mail：

Manager Pan · Sales Department 2：

E-mail：

Manager Xing · Foreign Trade Department：

E-mail：

在线客服添加返回顶部

启用全局默认滚动动画 (向上滚动)

禁止全站的文字复制和图片下载 .copy-ok

右侧在线客服样式 1,2,3 1

图片alt标题设置： Shanghai Runlan Filtration Equipment Co., Ltd.

表单验证提示文本： The content cannot be empty!

循环体没有内容时： Sorry, no matching items found.

CSS / JS 文件放置地